|
Push the VERTICAL Limit.
Push your operation to the limit with the V270 vertical-lift skid loader from Gehl. Vertical-lift linkage provides total control and excellent forward reach, even at full lift height. The added reach at the top of the lift cycle makes material handling and loading easy!
Choice of Controls: Hand/Foot Controls, Joystick Controls (pictured), and dual-hand controls.
A fully adjustable environment and excellent visibility to the bucket cutting edge and side work areas.
Large engine cover is hinged and positioned by gas-springs to assist in lifting and holding the cover in place for easy, safe maintenance.
|
| Engine |
Yanmar |
| Model |
4TNV98T-ZNMS |
| Power (HP)-(kW)/rpm |
84-62.6 / 2500 |
| Auxiliary Hydraulics - Standard |
82.3 (L/min) |
| High-Flow Auxiliary Hydraulics (Optional) |
139.7 (L/min) |
| System Relief Pressure |
231 (bar) |
| Hydraulic Reservoir |
41.6 (L) |
| Rated Operating Capacity |
1225 (kg) |
| Travel Speed - Maximum |
13 (km/h) |
| Travel Speed - 2-speed (Optional) |
19.2 (km/hr) |
| Operating Weight |
3629 (kg) |
| A) Overall Operating Height |
4313 (mm) |
| B) Height to Hinge Pin (fully raised) |
3310 (mm) |
| C) Overall Height (to top of ROPS) |
2045 (mm) |
| D) Ground Clearance to Chassis |
203 (mm) |
| E) Overall Length |
3790 (mm) |
| F) Overall Length (w/o bucket) |
2921 (mm) |
| G) Wheelbase |
1265 (mm) |
| H) Dump Reach |
864 (mm) |
| J) Dump Angle |
41° |
| K) Overall Width |
1765 (mm) |
| L) Bucket Width |
1778 (mm) |
| M) Clearance Circle (rear) |
1664 (mm) |
| N) Clearance Circle (front, w/o bucket) |
1895 (mm) |
| O) Clearance Circle (front, w/bucket) |
2362 (mm) |
| P) Seat to Ground Height |
1021 (mm) |
| Q) Rollback at Full Height |
94° |
| R) Dump Height |
2515 (mm) |
| S) Departure Angle |
27° |
|
 |
|
Copyright © 2017 Agrimec.eu. All Rights Reserved.
Other marks or logos appearing on this site are property of their respective owners.
